Honda S2000 (AP2, 2004-2009)

Added 2026-10-26 · Updated 2026-10-26

What fits a Honda S2000 (AP2, 2004-2009), and what goes wrong with it?

As of 2026-10-26, ChassisDex has 10 fitment answers, 2 known problems and 5 build entries for this car, each linked to its sources and rated with a confidence tier. Generation basics first, then every entry.

Years	2004-2009
Trims	US: S2000 roadster 2004-09; S2000 CR (Club Racer) 2008-09 with a removable aluminum hardtop instead of the soft top, rear body brace, aero kit, stiffer springs and larger stabilizers, 13.8:1 steering and a 255/40R17 rear tire (Honda's 2008 releases). 2006 added drive-by-wire and stability control (reference site).
Engine	F22C1 2.2-liter: 240 hp at 7,800 rpm, 162 lb-ft at 6,500, rev limit (fuel cutoff) 8,200 rpm for 2004 (Honda's 2004 release).
Notes	Bolt pattern 5x114.3 and M12x1.5 per reference sources, same as the AP1. Wheel nuts 80 lbf·ft (108 N·m) in the 2004, 2008 and 2009 owner's manuals. 17-inch wheels from 2004: 17x7.0 front and 17x8.5 rear on every year and on the CR (Honda's 2004 and 2008 spec sheets). Brakes unchanged at 11.8 in vented front / 11.1 in rear. Steering slowed to 14.9:1 (13.8:1 on the CR).

Generation facts are drawn from: American Honda (hondanews.com), American Honda (hondanews.com), American Honda (hondanews.com), American Honda (hondanews.com), American Honda (hondanews.com), American Honda (hosted by the S2000 fan wiki), American Honda (hosted by the S2000 fan wiki), AP1AP2.com (independent S2000 reference site).

Wheel and hub specs

Bolt pattern	5x114.3
Hub (center) bore	70.1 mm front and 64.1 mm rear
Lug thread	M12x1.5
Factory wheel sizes	17x7JJ front +55 (reference sources; Honda prints none), 215/45R17 87W (2004-2009, S2000 and CR; Bridgestone RE050 on S2000, RE070 on CR) 17x8.5JJ rear +65 (reference sources; Honda prints none), 245/40R17 91W (2004-2009, S2000; Bridgestone RE050) 17x8.5JJ rear +65 (reference sources; Honda prints none), 255/40R17 94W (2008-2009, CR; Bridgestone RE070, Kaiser Silver wheels) T125/70D16 temporary spare, T125/70D16 96M (2004-2009, S2000 only; the CR carries a sealant kit)
Note	Hub bore is unresolved: about 70.1 mm front and 64.1 mm rear per a reference site, a ring retailer and two forum threads; another reference site gives a single 64.1 mm. No Honda document read states it. Offsets come only from reference sites and an enthusiast guide.

Wheel specs from: American Honda (hondanews.com), American Honda (hondanews.com), American Honda (hondanews.com), American Honda (hondanews.com), American Honda (hosted by the S2000 fan wiki), American Honda (hosted by the S2000 fan wiki), American Honda (hosted by the S2000 fan wiki), AP1AP2.com (independent S2000 reference site), AP1AP2.com (independent S2000 reference site), Tirefolio (wheel-spec reference site, citing bolt-pattern.com), S2000 Club (enthusiast guide, hosted PDF printed October 3, 2018), KA Autosport (wheel retailer, Australia), S2KI Honda S2000 forum, S2KI Honda S2000 forum.

Other cars with 5x114.3 (sourced swap answers only).

Parts interchange

Honda S2000 AP2 parts on a Honda S2000 AP1: what swaps (7 answers)
Honda S2000 AP1 parts on a Honda S2000 AP2: what swaps (5 answers)

Will it fit?

Part	Result	Years	Confidence
OEM 2004-09 S2000 (AP2) 17-inch wheels, 17x7 front / 17x8.5 rear	Factory spec Specification	2004-2009	Reported
OEM 2008-09 S2000 CR 17-inch wheels (Kaiser Silver), 17x7 front / 17x8.5 rear	Factory spec Specification	2008-2009	Reported
OEM 2000-03 S2000 (AP1) 16-inch wheels, 16x6.5 front / 16x7.5 rear	Fits Reported to fit	2004-2009	Limited
OEM 2000-03 S2000 (AP1) dampers	Fits Reported to fit	2004-2009	Limited
OEM 2000-01 S2000 (AP1) front stabilizer bar, 28.2 mm	Fits Reported to fit	2004-2009	Limited
Genuine Honda Accessory S2000 aluminum hardtop	Fits with mods Fits with extra parts or work	2004-2009	Limited
OEM 2008-09 S2000 CR springs, dampers and stabilizer bars	Fits Reported to fit	2004-2009	Limited
OEM 2000-03 S2000 (AP1) steering rack (13.8:1)	Fits Reported to fit	2004-2005	Limited
OEM 2008-09 S2000 CR steering rack (13.8:1)	Unclear Unclear — details missing	2006-2009	Limited
OEM 2000-03 S2000 (AP1) front brake rotors (11.8 in vented)	Fits Reported to fit	2004-2009	Limited

Known issues (overview)

Best mods by goal

Part of Honda S2000 · all platforms.

Stay current: get new fitment notes by email (form below) or read the newsletter archive.

Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.