Will OEM 2008-09 S2000 CR springs, dampers and stabilizer bars fit a Honda S2000 (AP2, 2004-2009)?
Added · Updated
Short answer: Yes, reportedly Limited
Verdict:Fits Limited confidence (1 of 3) · 3 sources
Yes, reportedly: Bolts on, per owners: springs, dampers and stabilizer bars interchange across all S2000 years, and owners add the CR front bar to an AP2.
Safety-critical part. Manufacturer sources are cited, but they disagree or are incomplete for this fitment, so this entry is held below "Confirmed". Have the work done or checked by a qualified professional and confirm figures and part numbers against the service manual or the manufacturer.
| Part | OEM 2008-09 S2000 CR springs, dampers and stabilizer bars |
|---|---|
| Vehicle | Honda S2000 (AP2, 2004-2009) |
| Years | 2004-2009 |
| Trim / condition | non-CR S2000 |
| Verdict | Fits Reported to fit |
| Confidence | Limited 1 of 3 — Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
Bolts on, per owners: springs, dampers and stabilizer bars interchange across all S2000 years, and owners add the CR front bar to an AP2. Use new damper bolts, per the same thread.
Specs
- note: CR-only settings per Honda's 2008 introduction: stiffer springs, firmer dampers, larger stabilizers.
Related build entries
Other suspension fitment for the AP2
- OEM 2000-03 S2000 (AP1) dampers — Reported to fit Fits
- OEM 2000-01 S2000 (AP1) front stabilizer bar, 28.2 mm — Reported to fit Fits
This part on other generations
- Honda S2000 (AP1, 2000-2003) — Reported to fit Fits
More for this car
- All Honda S2000 (AP2, 2004-2009) fitment answers · AP2 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- CR Suspension into AP1 — S2KI Honda S2000 forum (forum thread; read 2026-10-26; full page read)Interchange across all years.
- AP1 sway bars on AP2? — S2KI Honda S2000 forum (forum thread; read 2026-10-26; full page read)Owners add the AP1 or CR front bar to an AP2.
- 2008 Honda S2000 & S2000 CR - Introduction — American Honda (hondanews.com) (mfr spec; read 2026-10-26; full page read)
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.