Will Nissan 300ZX (Z32) front knuckle and hub fit a Nissan 240SX (S13, 1989-1994)?
Added · Updated
Short answer: No Limited
Verdict:Doesn't fit Limited confidence (1 of 3) · 1 source
No: No.
Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.
| Part | Nissan 300ZX (Z32) front knuckle and hub |
|---|---|
| Vehicle | Nissan 240SX (S13, 1989-1994) |
| Years | 1989-1994 |
| Trim / condition | all |
| Verdict | Doesn't fit Does not fit |
| Confidence | Limited 1 of 3 — Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
No. A forum answer says Z32 front spindles will not bolt on because the Z32 uses upper control arms up front, and Z32 front hubs will not fit S13 or S14 spindles because the taper differs. Use aftermarket hubs or S14 parts instead.
Related build entries
Other wheels fitment for the S13
- OEM S13 240SX 15x6-JJ steel wheel (+40) — Specification Factory spec
- OEM S13 240SX 15x6-JJ aluminum wheel (+40) — Specification Factory spec
- Factory wheel fastening spec, S13 240SX (4x114.3, M12x1.25) — Specification Factory spec
- Any 5x114.3 wheel on a 4-lug S13 — Does not fit Doesn't fit
- OEM S14 240SX SE / LE 16x6.5-JJ 5-spoke aluminum wheel (5-lug) — Does not fit Doesn't fit
- GK Tech S13 240SX 5-lug hub conversion, front and rear — Fits with extra parts or work Fits with mods
More for this car
- All Nissan 240SX (S13, 1989-1994) fitment answers · S13 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- The real deal about the 5-lug conversion — Tampa Racing forums (2005) (forum thread; read 2026-10-26; full page read)Z32 will not fit up front; spindle and taper differ.
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.