Will GK Tech S13 240SX 5-lug hub conversion, front and rear fit a Nissan 240SX (S13, 1989-1994)?
Added · Updated
Short answer: Yes, with extra parts or work Reported
Verdict:Fits with mods Reported confidence (2 of 3) · 2 sources
Yes, with extra parts or work: Yes, with work.
Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.
| Part | GK Tech S13 240SX 5-lug hub conversion, front and rear |
|---|---|
| Vehicle | Nissan 240SX (S13, 1989-1994) |
| Years | 1989-1994 |
| Trim / condition | all |
| Verdict | Fits with mods Fits with extra parts or work |
| Confidence | Reported 2 of 3 — Stated by one reasonably reputable source (retailer, shop, magazine). Not independently confirmed. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
Yes, with work. GK Tech's billet front hubs reuse the OEM S13 bearing and snap ring, and its rear hub assemblies bolt to the S13 rear knuckles, converting 4x114.3 to 5x114.3 with M12x1.25 studs and a 66.1 mm bore. You also need 5-lug rotors (or re-drilled fronts). Front bearings, ABS ring and snap ring are not included. A retailer guide describes the same hub-only route.
Specs
- converts: 4x114.3 to 5x114.3
- studs: M12x1.25
- hub bore mm: 66.1
- front: reuses OEM bearing and snap ring
- rear: bolts to S13 rear knuckles
- needs: 5-lug rotors (or re-drilled fronts)
Related build entries
Other wheels fitment for the S13
- OEM S13 240SX 15x6-JJ steel wheel (+40) — Specification Factory spec
- OEM S13 240SX 15x6-JJ aluminum wheel (+40) — Specification Factory spec
- Factory wheel fastening spec, S13 240SX (4x114.3, M12x1.25) — Specification Factory spec
- Any 5x114.3 wheel on a 4-lug S13 — Does not fit Doesn't fit
- OEM S14 240SX SE / LE 16x6.5-JJ 5-spoke aluminum wheel (5-lug) — Does not fit Doesn't fit
- OEM S14 240SX SE front knuckle (spindle) and 5-lug hub — Fits with extra parts or work Fits with mods
More for this car
- All Nissan 240SX (S13, 1989-1994) fitment answers · S13 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- S13 240SX 5-lug hub conversion, front and rear — GK Tech (part maker's own product listing) (vendor article; read 2026-10-26; full page read)Front hubs reuse OEM bearing and snap ring; rear hubs bolt to S13 knuckles; needs 5-lug rotors.
- S13 5-lug conversion guide — Just Schassis (S-chassis parts retailer; Nov 29, 2022) (vendor article; read 2026-10-26; full page read)Conversion hubs bolt into stock knuckles; 5-lug rotors needed.
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.