Will OEM S14 240SX SE front knuckle (spindle) and 5-lug hub fit a Nissan 240SX (S13, 1989-1994)?
Added · Updated
Short answer: Yes, with extra parts or work Limited
Verdict:Fits with mods Limited confidence (1 of 3) · 2 sources
Yes, with extra parts or work: Reported to fit with work.
Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.
| Part | OEM S14 240SX SE front knuckle (spindle) and 5-lug hub |
|---|---|
| Part comes from | Nissan 240SX (S14, 1995-1998) |
| Vehicle | Nissan 240SX (S13, 1989-1994) |
| Years | 1989-1994 |
| Trim / condition | all |
| Verdict | Fits with mods Fits with extra parts or work |
| Confidence | Limited 1 of 3 — Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
Reported to fit with work. Owners fit S14 front spindles with 5-lug hubs, press S14 ball joints into the S13 lower arms, and either sleeve the S14 strut bolt holes or drill the S13 strut and use S14 bolts, since the S14 holes are larger. Add 5-lug rotors. Forum-only, so tier 1.
Specs
- bolt pattern: 5x114.3
Related build entries
Other wheels fitment for the S13
- OEM S13 240SX 15x6-JJ steel wheel (+40) — Specification Factory spec
- OEM S13 240SX 15x6-JJ aluminum wheel (+40) — Specification Factory spec
- Factory wheel fastening spec, S13 240SX (4x114.3, M12x1.25) — Specification Factory spec
- Any 5x114.3 wheel on a 4-lug S13 — Does not fit Doesn't fit
- OEM S14 240SX SE / LE 16x6.5-JJ 5-spoke aluminum wheel (5-lug) — Does not fit Doesn't fit
- GK Tech S13 240SX 5-lug hub conversion, front and rear — Fits with extra parts or work Fits with mods
This part on other generations
- Nissan 240SX (S14, 1995-1998) — Fits with extra parts or work Fits with mods
More for this car
- All Nissan 240SX (S13, 1989-1994) fitment answers · S13 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- The real deal about the 5-lug conversion — Tampa Racing forums (2005) (forum thread; read 2026-10-26; full page read)S14 SE spindles and hubs; S14 ball joints into S13 arms; S14 strut bolt holes larger.
- 5-stud conversion guide (S13) — SXOC forums (forum thread; read 2026-10-26; full page read)
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.