Will OEM S14 240SX SE / LE 16x6.5-JJ 5-spoke aluminum wheel (5-lug) fit a Nissan 240SX (S13, 1989-1994)?
Added · Updated
Short answer: No Reported
Verdict:Doesn't fit Reported confidence (2 of 3) · 3 sources
No: No, not on a stock S13.
Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.
| Part | OEM S14 240SX SE / LE 16x6.5-JJ 5-spoke aluminum wheel (5-lug) |
|---|---|
| Part comes from | Nissan 240SX (S14, 1995-1998) |
| Vehicle | Nissan 240SX (S13, 1989-1994) |
| Years | 1989-1994 |
| Trim / condition | all |
| Verdict | Doesn't fit Does not fit |
| Confidence | Reported 2 of 3 — Stated by one reasonably reputable source (retailer, shop, magazine). Not independently confirmed. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
No, not on a stock S13. The S14 SE / LE 16-inch alloys are 5x114.3 and the S13 is 4-lug. After a 5-lug conversion they are a common choice, but check brake clearance and the offset (+40 per Nissan, ET45 per one size site).
Specs
- bolt pattern: 5x114.3
- centerbore mm: 66.1
- size: 16x6.5-JJ
- offset mm: +40 (1995 and 1998 manuals, 1997 press text); ET45 per one size site
- tire: P205/55R16 89V
Other wheels fitment for the S13
- OEM S13 240SX 15x6-JJ steel wheel (+40) — Specification Factory spec
- OEM S13 240SX 15x6-JJ aluminum wheel (+40) — Specification Factory spec
- Factory wheel fastening spec, S13 240SX (4x114.3, M12x1.25) — Specification Factory spec
- Any 5x114.3 wheel on a 4-lug S13 — Does not fit Doesn't fit
- GK Tech S13 240SX 5-lug hub conversion, front and rear — Fits with extra parts or work Fits with mods
- OEM S14 240SX SE front knuckle (spindle) and 5-lug hub — Fits with extra parts or work Fits with mods
This part on other generations
- Nissan 240SX (S14, 1995-1998) — Unclear — details missing Unclear
More for this car
- All Nissan 240SX (S13, 1989-1994) fitment answers · S13 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- 1995 Nissan 240SX Service Manual, GI section — Nissan Motor Co. (service manual); mirror on nicoclub.com (mfr spec; read 2026-10-26; full page read)16x6-1/2JJ aluminum, offset 40 mm.
- Nissan 240SX wheel specs — Element Wheels (wheel data site; updated May 20, 2026) (vendor article; read 2026-10-26; full page read)
- 240SX buying guide — NICO Club (Nissan enthusiast site; Dec 10, 2009) (editorial; read 2026-10-26; full page read)SE and LE got 5-lug 16-inch wheels.
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.