Mitsubishi Lancer Evolution IX (2006)
Added · Updated
What fits a Mitsubishi Lancer Evolution IX (2006), and what goes wrong with it?
As of 2026-10-26, ChassisDex has 9 fitment answers, 4 known problems and 4 build entries for this car, each linked to its sources and rated with a confidence tier. Generation basics first, then every entry.
| Years | 2006 |
|---|---|
| Trims | US 2006 sedan only: RS, Evolution IX (5-speed), MR (6-speed, Bilstein, BBS) and, from mid-2006, the SE (5-speed, BBS wheels in Diamond Black, aluminum roof, HID). The Evolution IX wagon was not sold in the US: no MMNA or NHTSA record read mentions a US Evolution wagon. |
| Engine | 4G63 2.0-liter turbo with MIVEC variable valve timing, 286 hp / 289 lb-ft (MMNA New York release, March 2005). |
| Notes | Wheels: 5x114.3, 67.1 mm hub, M12x1.5 nuts. All trims 17x8JJ ET38 with P235/45R17 93W (MMNA spec sheet): Enkei on RS and IX, BBS forged on MR and SE. Brakes: Brembo ventilated 320 x 32 mm fronts with 4-piston calipers and ventilated 300 x 22 mm rears with 2-piston calipers; RS has no ABS. ACD, front helical LSD and a 1.5-way mechanical rear LSD on every trim (no AYC). |
Generation facts are drawn from: Mitsubishi Motors North America, Mitsubishi Motors North America (hosted by The Auto Channel), Mitsubishi Motors North America, NHTSA, EvolutionM forum.
Wheel and hub specs
| Bolt pattern | 5x114.3 |
|---|---|
| Hub (center) bore | 67.1 mm |
| Lug thread | M12x1.5 nuts (seat type not stated by Mitsubishi) |
| Factory wheel sizes |
|
| Note | Square fitment on every trim. The MR and SE BBS wheels differ in finish; owners list them separately. |
Wheel specs from: Mitsubishi Motors North America, Mitsubishi Motors North America (hosted by The Auto Channel), Mitsubishi Motors North America, EvolutionM forum, EvolutionM forum, STM Tuned, BuildMyWhip.
Other cars with 5x114.3 (sourced swap answers only).
Parts interchange
- Mitsubishi Lancer Evolution CT9A (Evolution VIII) parts on a Mitsubishi Lancer Evolution CT9A (Evolution IX): what swaps (3 answers)
- Mitsubishi Lancer Evolution CT9A (Evolution IX) parts on a Mitsubishi Lancer Evolution CT9A (Evolution VIII): what swaps (6 answers)
Will it fit?
| Part | Result | Years | Confidence |
|---|---|---|---|
| OEM Evo VIII (2003-05 base/RS/VIII) Enkei 17x8 ET38 wheel | Fits Reported to fit | 2006 | Reported |
| OEM Evo VIII MR (2005) BBS forged 17x8 ET38 wheel | Fits Reported to fit | 2006 | Limited |
| OEM Evo VIII (2003-05 non-MR) 5-speed manual transaxle (W5M51) | Fits with mods Fits with extra parts or work | 2006 | Limited |
| OEM Evo IX (2006 RS/IX) Enkei 17x8 ET38 wheel | Factory spec Specification | 2006 | Confirmed |
| OEM Evo IX MR (2006) BBS forged 17x8 ET38 wheel | Factory spec Specification | 2006 | Confirmed |
| OEM Evo IX SE (2006) BBS forged 17-inch wheel, Diamond Black | Factory spec Specification | 2006 | Reported |
| Factory tire P235/45R17 93W (Evo VIII/IX, all US trims) | Factory spec Specification | 2006 | Confirmed |
| Factory wheel nut spec, Evo VIII/IX (M12x1.5) | Factory spec Specification | 2006 | Reported |
| OEM Evo IX (2006, all US trims) Brembo brakes: 320 mm 4-piston front, 300 mm 2-piston rear | Factory spec Specification | 2006 | Confirmed |
Known issues (overview)
- Recall 16V-334: passenger front air bag inflator may rupture (2006) Reported
- Recall 16V-458: front crossmember corrosion can let the lower arms detach (salt states) Reported
- ACD pump faults: all ACD mode lights flash Limited
- Rear wing center element can break at high speed Limited
Best mods by goal
- First steps (1)
- Drivetrain (1)
- Wheels & tires (1)
- Suspension (1)
Part of Mitsubishi Lancer Evolution · all platforms.
Stay current: get new fitment notes by email (form below) or read the newsletter archive.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.