How reliable is this fitment answer?

Confidence: Limited (1 of 3). Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research. Based on 2 cited source(s), last verified 2026-10-26.

Will OEM 1999-2000 Civic Si 15-inch machine-finished alloy with 195/55R15 fit a Honda Civic EG (1992-1995) and Civic del Sol (1993-1997)?

Q: Will OEM 1999-2000 Civic Si 15-inch machine-finished alloy with 195/55R15 fit a Honda Civic EG (1992-1995) and Civic del Sol (1993-1997)?

Yes, reportedly. Same reasoning: shared 4x100 / 56.1 mm / M12x1.5 specs and a reference site's cross-compatibility claim for 1992-2004 Civics, which it conditions on matching offset and bore; Honda prints no offset for this wheel in sources read. The 15-inch Si wheel is larger than any EG factory wheel, so check fender clearance at your ride height.

Added 2026-10-26 · Updated 2026-10-26

Short answer: Yes, reportedly Limited

Verdict:Fits Limited confidence (1 of 3) · 2 sources

Yes, reportedly: Same reasoning: shared 4x100 / 56.1 mm / M12x1.5 specs and a reference site's cross-compatibility claim for 1992-2004 Civics, which it conditions on matching offset and bore; Honda prints no offset for this wheel in sources read.

Years: 1992-1995 · Applies to: EG Civic · 2 sources · Last verified 2026-10-26

Safety-critical part. Manufacturer sources are cited, but they disagree or are incomplete for this fitment, so this entry is held below "Confirmed". Have the work done or checked by a qualified professional and confirm figures and part numbers against the service manual or the manufacturer.

Part	OEM 1999-2000 Civic Si 15-inch machine-finished alloy with 195/55R15
Part comes from	Honda Civic EK (1996-2000)
Vehicle	Honda Civic EG (1992-1995) and Civic del Sol (1993-1997)
Years	1992-1995
Trim / condition	EG Civic
Verdict	Fits Reported to fit
Confidence	Limited 1 of 3 — Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research.
Last verified	2026-10-26 (date the cited sources were last read)

Details

Same reasoning: shared 4x100 / 56.1 mm / M12x1.5 specs and a reference site's cross-compatibility claim for 1992-2004 Civics, which it conditions on matching offset and bore; Honda prints no offset for this wheel in sources read. The 15-inch Si wheel is larger than any EG factory wheel, so check fender clearance at your ride height.

Specs

bolt pattern: 4x100
size: 15-inch
tire: 195/55R15

Other wheels fitment for the EG

OEM EG Civic 13-inch wheel with 165/70R13 (CX, VX) — Specification Factory spec
OEM EG Civic 13-inch wheel with 175/70R13 (DX; 1992 LX) — Specification Factory spec
OEM EG Civic 14-inch wheel with 175/65R14 (1992 EX; 1995 EX sedan and LX) — Specification Factory spec
OEM EG Civic 14-inch wheel with 185/60R14 (Si; 1995 EX coupe) — Unclear — details missing Unclear
OEM Civic del Sol 13x5J steel wheel with full cover and P175/70R13 (S) — Specification Factory spec
OEM Civic del Sol 14x5.5JJ alloy wheel with P185/60R14 (Si) — Specification Factory spec

This part on other generations

Honda Civic EK (1996-2000) — Specification Factory spec

More for this car

All Honda Civic EG (1992-1995) and Civic del Sol (1993-1997) fitment answers · EG common problems
Newsletter archive: past issues with every new and corrected entry

Sources

1998 Honda Civic bolt pattern and wheel specs — BoltPattern HQ (wheel-spec reference site) (editorial; read 2026-10-26; full page read)
1999 Honda Civic Si press release (Feb. 10, 1999): engine, chassis, wheel and brake details — Honda press release, reproduced by The Auto Channel (mfr spec; read 2026-10-26; full page read)
Si wheel size.

Summaries are in our own words. Fitment is not guaranteed — disclaimer.

Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.