Will OEM 2006-2007 WRX wheel (17x7 +55) fit a Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020)?
Added · Updated
Short answer: Unclear Limited
Verdict:Unclear Limited confidence (1 of 3) · 2 sources
Unclear: Unclear.
Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.
| Part | OEM 2006-2007 WRX wheel (17x7 +55) |
|---|---|
| Part comes from | Subaru WRX (GD/GG, 2002-2007) |
| Vehicle | Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020) |
| Years | 2013-2020 |
| Trim / condition | all |
| Verdict | Unclear Unclear — details missing |
| Confidence | Limited 1 of 3 — Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
Unclear. The 2006-07 WRX wheel (17x7 +55) bolts to the same 5x100 / 56.1 mm hub and uses the ZN6's 215/45R17 tire size, but its +55 offset puts it 7 mm further inboard than the factory +48 wheel. No source reports strut or caliper clearance on a BRZ, FR-S or 86.
Specs
- bolt pattern: 5x100
- centerbore mm: 56.1
- size: 17x7
- offset mm: 55
- tire: 215/45R17
Other wheels fitment for the ZN6/ZC6
- OEM 2013-20 86 / BRZ / FR-S wheel (17x7 +48) — Specification Factory spec
- OEM 2017-20 BRZ Performance Package wheel (17x7.5 +48) — Specification Factory spec
- OEM late ZN6 18-inch wheel (18x7.5 +48: BRZ tS, 86 TRD SE / GT) — Specification Factory spec
- Factory wheel studs and lug nuts (M12x1.25, 60-degree cone seat) — Specification Factory spec
- Hub-centric rings to 56.1 mm (for aftermarket 5x100 wheels) — Reported to fit Fits
- 17x9 +35 wheels with 245/40R17 tires — Reported to fit Fits
This part on other generations
- Subaru WRX (GD/GG, 2002-2007) — Specification Factory spec
- Toyota GR86 / Subaru BRZ (ZN8/ZD8, 2022+) — Unclear — details missing Unclear
More for this car
- All Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020) fitment answers · ZN6/ZC6 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- Master thread of OEM Subaru Wheel Specs — NASIOC (forum; compiled by a Subaru parts shop owner) (forum thread; read 2026-10-26; full page read)
- Subaru BRZ Wheel Fitment Guide (2013-2020) — rimlist (wheel guide site with affiliate links) (editorial; read 2026-10-26; full page read)General ZN6 inner-clearance notes (front strut contact with wide wheels).
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.