Will Hub-centric rings to 56.1 mm (for aftermarket 5x100 wheels) fit a Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020)?
Added · Updated
Short answer: Yes, reportedly Reported
Verdict:Fits Reported confidence (2 of 3) · 2 sources
Yes, reportedly: Many aftermarket 5x100 wheels have a 73.1 mm (sometimes 67.1 mm) bore, so a ring that steps down to the car's 56.1 mm hub keeps the wheel hub-centred.
Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.
| Part | Hub-centric rings to 56.1 mm (for aftermarket 5x100 wheels) |
|---|---|
| Vehicle | Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020) |
| Years | 2013-2020 |
| Trim / condition | aftermarket wheels with a bore larger than 56.1 mm |
| Verdict | Fits Reported to fit |
| Confidence | Reported 2 of 3 — Stated by one reasonably reputable source (retailer, shop, magazine). Not independently confirmed. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
Many aftermarket 5x100 wheels have a 73.1 mm (sometimes 67.1 mm) bore, so a ring that steps down to the car's 56.1 mm hub keeps the wheel hub-centred. Guides recommend aluminium rings for track use because brake heat can soften plastic ones. Factory Subaru wheels already match the hub.
Specs
- inner mm: 56.1
- common outer mm: 73.1 or 67.1 (match the wheel's bore)
Related build entries
Other wheels fitment for the ZN6/ZC6
- OEM 2013-20 86 / BRZ / FR-S wheel (17x7 +48) — Specification Factory spec
- OEM 2017-20 BRZ Performance Package wheel (17x7.5 +48) — Specification Factory spec
- OEM late ZN6 18-inch wheel (18x7.5 +48: BRZ tS, 86 TRD SE / GT) — Specification Factory spec
- Factory wheel studs and lug nuts (M12x1.25, 60-degree cone seat) — Specification Factory spec
- 17x9 +35 wheels with 245/40R17 tires — Reported to fit Fits
- 18x9.5 +40 wheels with 265-275 width tires — Fits with extra parts or work Fits with mods
More for this car
- All Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020) fitment answers · ZN6/ZC6 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- 16 inch wheels — FT86CLUB (forum) (forum thread; read 2026-10-26; full page read)
- Enkei RPF1 Wheel 17x7.5 +48 (5x100) — OAKOS Automotive (retailer product page) (vendor article; read 2026-10-26; search excerpt only)Search excerpt: this RPF1 lists a 73 mm bore.
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.