What is the factory spec for the OEM 2016-19 WRX (VA) front brake (2-piston floating caliper, 316 mm rotor) on a Subaru WRX and STI (VA, 2015-2021)?

Added · Updated

Short answer: Factory specification Confirmed

Verdict:Factory spec Confirmed confidence (3 of 3) · 3 sources

Factory specification: Factory VA WRX front brake: 2-piston floating caliper on a 316 x 30 mm ventilated rotor ('17-inch type') in the 2016 and 2019 manuals, up from the 2008-14 WRX's 294 mm.

Years: 2016-2019 · Applies to: WRX (STI uses Brembo) · 3 sources · Last verified 2026-10-26

Safety-critical part. This spec is confirmed from manufacturer documentation (listed under Sources). Still check it against the factory service manual for your exact car, or have a qualified shop do or check the work.
PartOEM 2016-19 WRX (VA) front brake (2-piston floating caliper, 316 mm rotor)
VehicleSubaru WRX and STI (VA, 2015-2021)
Years2016-2019
Trim / conditionWRX (STI uses Brembo)
VerdictFactory spec Specification
ConfidenceConfirmed 3 of 3 — Backed by a manufacturer document, or two or more independent sources agree on a specific checkable fact.
Last verified2026-10-26 (date the cited sources were last read)

Details

Factory VA WRX front brake: 2-piston floating caliper on a 316 x 30 mm ventilated rotor ('17-inch type') in the 2016 and 2019 manuals, up from the 2008-14 WRX's 294 mm. The 2015 release says the 2015 WRX got larger front brakes but gives no size, so 2015 is left out.

Specs

Other brakes fitment for the VA

More for this car

Sources

Summaries are in our own words. Fitment is not guaranteed — disclaimer.

Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.

Get new fitment notes by email

Occasional updates (about monthly) when we add or correct ChassisDex entries.

Double opt-in: we email you a confirm link first. Email address only, never sold or shared; unsubscribe any time. Privacy note.