What is the factory spec for the Factory wheel fastening spec, 350Z (M12x1.25 lug nuts) on a Nissan 350Z (Z33, 2003-2009)?
Added · Updated
Short answer: Factory specification Reported
Verdict:Factory spec Reported confidence (2 of 3) · 5 sources
Factory specification: 5x114.3, 66.1 mm hub bore, M12x1.25 thread.
Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.
| Part | Factory wheel fastening spec, 350Z (M12x1.25 lug nuts) |
|---|---|
| Vehicle | Nissan 350Z (Z33, 2003-2009) |
| Years | 2003-2009 |
| Trim / condition | all |
| Verdict | Factory spec Specification |
| Confidence | Reported 2 of 3 — Stated by one reasonably reputable source (retailer, shop, magazine). Not independently confirmed. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
5x114.3, 66.1 mm hub bore, M12x1.25 thread. Nissan's manual torque: 98.1-127 N·m (73-93 ft-lb) for 2003, 108 N·m (80 ft-lb) for 2007. Three wheel references agree on pattern, bore and thread; the Nissan manual sections read state only the torque, not the pattern, bore or thread, so the row is held at tier 2.
Specs
- thread: M12x1.25
- torque: 98.1-127 N·m (2003 manual); 108 N·m / 80 ft-lb (2007 manual)
- bolt pattern: 5x114.3
- centerbore mm: 66.1
Related build entries
Other wheels fitment for the Z33
- OEM 350Z 17-inch wheels, 2003-2005 base / Enthusiast / Touring 5AT (17x7.5 / 17x8) — Specification Factory spec
- OEM 350Z 18-inch wheels, 2003-2005 Performance / Touring 6MT — Unclear — details missing Unclear
- OEM 350Z Track forged 18-inch wheels, 2003-2005 (18x8 / 18x8.5) — Specification Factory spec
- OEM 350Z 18-inch wheels, 2007 350Z / Enthusiast / Touring (18x8 +30 / 18x8.5 +33) — Specification Factory spec
- OEM 350Z RAYS forged wheels, 2007-2008 Grand Touring / NISMO (18x9 +30 / 19x10 +30) — Specification Factory spec
- Non-Brembo 350Z temporary spare on a Brembo 350Z — Does not fit Doesn't fit
More for this car
- All Nissan 350Z (Z33, 2003-2009) fitment answers · Z33 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- 2003 Nissan 350Z Service Manual, section WT (road wheels and tires) — Nissan North America service manual (section PDF hosted by nicoclub.com) (mfr spec; read 2026-10-26; full page read)Wheel nut 98.1-127 N·m (73-93 ft-lb).
- 2007 Nissan 350Z Service Manual, section WT (road wheels and tires) — Nissan North America service manual (section PDF hosted by nicoclub.com) (mfr spec; read 2026-10-26; full page read)Wheel nut 108 N·m (80 ft-lb).
- Nissan 350Z (Z33) wheel specs — Tirefolio (tire and wheel data site) (vendor article; read 2026-10-26; full page read)
- Nissan Z wheel fitment: the hub is shared, the fitment is not — SHC Autographx (wheel shop blog) (vendor article; read 2026-10-26; full page read)
- 2003-2007 Infiniti G35 (V35) wheel fitment guide — ThreePiece (wheel retailer blog, Apr 2026) (vendor article; read 2026-10-26; full page read)
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.