Will Flyin' Miata Evolver 17x8 +45 flow formed wheel (ND) fit a Mazda Miata ND (2016-present US model years)?
Added · Updated
Short answer: Yes, reportedly Reported
Verdict:Fits Reported confidence (2 of 3) · 1 source
Yes, reportedly: 17x8 +45, 67.1 mm bore (not hubcentric on a Miata; rings optional), 17.5 lb.
Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.
| Part | Flyin' Miata Evolver 17x8 +45 flow formed wheel (ND) |
|---|---|
| Vehicle | Mazda Miata ND (2016-present US model years) |
| Years | 2016-2027 |
| Trim / condition | all brakes including factory Brembo |
| Verdict | Fits Reported to fit |
| Confidence | Reported 2 of 3 — Stated by one reasonably reputable source (retailer, shop, magazine). Not independently confirmed. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
17x8 +45, 67.1 mm bore (not hubcentric on a Miata; rings optional), 17.5 lb. The vendor says it clears the factory Brembos and fits 225/45-17 or 235/40-17 under unmodified fenders; very wide 235s may polish the lower control arm at full lock.
Specs
- bolt pattern: 4x100
- size: 17x8
- offset mm: 45
- center bore mm: 67.1
- weight lb: 17.5
Related build entries
Other wheels fitment for the ND
- OEM ND Miata 16x6.5 alloy wheel with 195/50R16 (Sport, 2016-2019) — Specification Factory spec
- OEM ND Miata 16-inch alloy wheel with 195/50R16 (Sport, 2024; width unclear) — Unclear — details missing Unclear
- OEM ND Miata 17x7 alloy wheel with 205/45R17 (Club / Grand Touring / RF, 2016-2019) — Specification Factory spec
- ND Miata factory wheel fastening (4x100, 54.1 mm hub, M12x1.5 lug nuts, 108-147 N·m) — Specification Factory spec
- NC Miata (2006-2015) factory or NC-fitment wheels — Does not fit Doesn't fit
- OEM NA wheel (14x5.5 or 15x6, +45) — Does not fit Doesn't fit
More for this car
- All Mazda Miata ND (2016-present US model years) fitment answers · ND common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- Evolver 17x8 flow formed wheel for ND — Flyin' Miata (parts vendor) (vendor article; read 2026-10-26; full page read)
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.