How reliable is this fitment answer?

Confidence: Limited (1 of 3). Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research. Based on 3 cited source(s), last verified 2026-10-26.

Will 350Z factory Brembo brakes (Track / GT / NISMO) on a non-Brembo G35 fit a Infiniti G35 (V35, 2003-2007 sedan and coupe)?

Q: Will 350Z factory Brembo brakes (Track / GT / NISMO) on a non-Brembo G35 fit a Infiniti G35 (V35, 2003-2007 sedan and coupe)?

Yes, with extra parts or work. Reported as doable with work. Owners say a 350Z Track Brembo set needs different rear caliper bolts and Brembo or aftermarket lines. One 2007 coupe owner had the pedal go to the floor until he fitted an earlier Brembo-car master cylinder and booster; several others say the stock master cylinder worked, including on a 2006 with larger calipers, so this is disputed. One sedan owner went back to stock brakes because his wheels did not clear. Forum-only.

Added 2026-10-26 · Updated 2026-10-26

Short answer: Yes, with extra parts or work Limited

Verdict:Fits with mods Limited confidence (1 of 3) · 3 sources

Yes, with extra parts or work: Reported as doable with work.

Years: 2003-2007 · Applies to: non-Brembo coupes; sedans less documented · 3 sources · Last verified 2026-10-26

Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.

Part	350Z factory Brembo brakes (Track / GT / NISMO) on a non-Brembo G35
Part comes from	Nissan 350Z (Z33, 2003-2009)
Vehicle	Infiniti G35 (V35, 2003-2007 sedan and coupe)
Years	2003-2007
Trim / condition	non-Brembo coupes; sedans less documented
Verdict	Fits with mods Fits with extra parts or work
Confidence	Limited 1 of 3 — Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research.
Last verified	2026-10-26 (date the cited sources were last read)

Details

Reported as doable with work. Owners say a 350Z Track Brembo set needs different rear caliper bolts and Brembo or aftermarket lines. One 2007 coupe owner had the pedal go to the floor until he fitted an earlier Brembo-car master cylinder and booster; several others say the stock master cylinder worked, including on a 2006 with larger calipers, so this is disputed. One sedan owner went back to stock brakes because his wheels did not clear. Forum-only.

Specs

note: Rear caliper bolts differ; one owner reports the 2006-2007 coupe master cylinder too small, others dispute it.

Related build entries

350Z or G35 Brembo brakes onto a non-Brembo G35

Other brakes fitment for the V35

Factory brake sizes, G35 coupe (2003 non-Brembo, 2003-2004 Brembo, 2007) — Specification Factory spec
Factory Brembo brakes, G35 coupe 2003-2004 6MT — Specification Factory spec

More for this car

All Infiniti G35 (V35, 2003-2007 sedan and coupe) fitment answers · V35 common problems
Newsletter archive: past issues with every new and corrected entry

Sources

Non-Brembo to OEM Brembo upgrade & stiffener question — G35Driver (forum) (forum thread; read 2026-10-26; full page read)
Rear caliper bolts and lines needed; one sedan owner's wheels did not clear.
Brembo upgrade (2007 G35 coupe) — G35Driver (forum) (forum thread; read 2026-10-26; full page read)
Disputed: one owner says the 2006-2007 master cylinder is too small; others say the stock one works.
Z1 350Z / G35 (Brembo) Brake Upgrade Kit — Z1 Motorsports (parts retailer) (vendor article; read 2026-10-26; full page read)

Summaries are in our own words. Fitment is not guaranteed — disclaimer.

Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.