Will OEM 2004-09 S2000 (AP2) tail lights fit a Honda S2000 (AP1, 2000-2003)?
Added · Updated
Short answer: Yes, with extra parts or work Limited
Verdict:Fits with mods Limited confidence (1 of 3) · 2 sources
Yes, with extra parts or work: Not a bolt-on.
| Part | OEM 2004-09 S2000 (AP2) tail lights |
|---|---|
| Part comes from | Honda S2000 (AP2, 2004-2009) |
| Vehicle | Honda S2000 (AP1, 2000-2003) |
| Years | 2000-2003 |
| Trim / condition | all |
| Verdict | Fits with mods Fits with extra parts or work |
| Confidence | Limited 1 of 3 — Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
Not a bolt-on. The AP2 lamp has three sections to the AP1's two, so the body openings must be cut larger and two new mounting holes drilled, and the wiring sockets differ. One owner's write-up took about two hours per side. Check every lamp function afterwards.
Specs
- note: Three-section lamp versus the AP1's two-section lamp, per an owner's conversion write-up.
Other body fitment for the AP1
- Genuine Honda Accessory S2000 aluminum hardtop — Reported to fit Fits
- Robbins replacement soft top for 2000-01 S2000, glass rear window (non-heated) — Fits with extra parts or work Fits with mods
- OEM 2002-09 S2000 glass-window soft top (cloth and frame) — Does not fit Doesn't fit
More for this car
- All Honda S2000 (AP1, 2000-2003) fitment answers · AP1 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- AP2 Tail light Conversion — S2000 Club (owner's how-to, hosted PDF printed September 20, 2018) (editorial; read 2026-10-26; full page read)Cut the body; drill two new holes; about two hours per side.
- AP2 tail lights in AP1 — S2KI Honda S2000 forum (forum thread; read 2026-10-26; full page read)Cut larger holes; wiring sockets differ.
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.