Will OEM 2004-09 S2000 (AP2, non-CR) springs and dampers fit a Honda S2000 (AP1, 2000-2003)?
Added · Updated
Short answer: Yes, reportedly Limited
Verdict:Fits Limited confidence (1 of 3) · 3 sources
Yes, reportedly: Bolts on, per owners: AP2 shocks and springs fit an AP1.
Safety-critical part. Manufacturer sources are cited, but they disagree or are incomplete for this fitment, so this entry is held below "Confirmed". Have the work done or checked by a qualified professional and confirm figures and part numbers against the service manual or the manufacturer.
| Part | OEM 2004-09 S2000 (AP2, non-CR) springs and dampers |
|---|---|
| Part comes from | Honda S2000 (AP2, 2004-2009) |
| Vehicle | Honda S2000 (AP1, 2000-2003) |
| Years | 2000-2003 |
| Trim / condition | all |
| Verdict | Fits Reported to fit |
| Confidence | Limited 1 of 3 — Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
Bolts on, per owners: AP2 shocks and springs fit an AP1. The ride and balance change because geometry and rates differ (Honda's 2004 chassis release describes revised settings), so align the car afterwards. Forum sources only.
Specs
- note: Honda's 2004 chassis release: revised spring and damper settings for 2004.
Related build entries
Other suspension fitment for the AP1
- OEM 2008-09 S2000 CR springs, dampers and stabilizer bars — Reported to fit Fits
More for this car
- All Honda S2000 (AP1, 2000-2003) fitment answers · AP1 common problems
- Newsletter archive: past issues with every new and corrected entry
Sources
- How Will Ap2 Suspension Work on an AP1? — S2KI Honda S2000 forum (forum thread; read 2026-10-26; full page read)AP2 suspension fits an AP1; rates and geometry differ.
- AP2 suspension on stock AP1 — S2KI Honda S2000 forum (forum thread; read 2026-10-26; full page read)
- 2004 Honda S2000 -- Chassis — American Honda (hondanews.com) (mfr spec; read 2026-10-26; full page read)2004: revised spring and damper settings.
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.