Factory wheel studs and lug nuts (M12x1.25, 60-degree cone seat)
Added · Updated
Which cars does the Factory wheel studs and lug nuts (M12x1.25, 60-degree cone seat) fit?
ZN6/ZC6 2013-2020: specification (Reported).
Category: wheels · Brand: Subaru / Toyota (OEM) · Comes from: Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020)
| Vehicle | Years | Result | Confidence |
|---|---|---|---|
| Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020) | 2013-2020 | Factory spec Specification | Reported |
Key specs
- thread: M12x1.25
- seat: 60-degree cone
- torque: about 89-90 ft-lb per two wheel guides; check the owner's manual
Short answers by generation
What is the factory spec for the Factory wheel studs and lug nuts (M12x1.25, 60-degree cone seat) on a Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020)?
Factory spec Factory specification (Reported, 3 sources; applies to: all). Studs are M12x1.25 and the factory nuts use a 60-degree cone (conical) seat, so aftermarket wheels need cone-seat nuts unless the wheel maker says otherwise. Full answer and sources
Related build entries
Related wheels parts
- OEM 2002-2004 WRX wheel (16x6.5 +53)
- OEM 2006-2007 WRX wheel (17x7 +55)
- 2004 STI wheel (17x7.5 +53, 5x100)
- OEM 2013-20 86 / BRZ / FR-S wheel (17x7 +48)
- OEM 2017-20 BRZ Performance Package wheel (17x7.5 +48)
- OEM late ZN6 18-inch wheel (18x7.5 +48: BRZ tS, 86 TRD SE / GT)
- Hub-centric rings to 56.1 mm (for aftermarket 5x100 wheels)
- 17x9 +35 wheels with 245/40R17 tires
More for this car
- All Toyota 86 / Subaru BRZ / Scion FR-S (ZN6/ZC6, 2013-2020) fitment answers · ZN6/ZC6 common problems
- Newsletter archive: past issues with every new and corrected entry
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.