How reliable is this fitment answer?

Confidence: Limited (1 of 3). Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research. Based on 3 cited source(s), last verified 2026-10-26.

Will OEM Evo VIII (2003-05, all US trims) Brembo 4-piston front calipers with 320 mm rotors fit a Nissan 240SX (S14, 1995-1998)?

Q: Will OEM Evo VIII (2003-05, all US trims) Brembo 4-piston front calipers with 320 mm rotors fit a Nissan 240SX (S14, 1995-1998)?

Yes, with extra parts or work. Fits with an adapter, per one retailer. TF-Works sells a stainless caliper bracket that mounts Evo VIII/IX Brembo front calipers on the front of an S13/S14 with Evo VIII/IX rotors, using the stock S13/S14 banjo lines or Evo VIII lines, and recommends a 1-1/16 inch Z32 master cylinder for proper pedal feel. The Evo rotor is a 5x114.3 part, so this suits the 5-lug SE/LE. Check wheel clearance: the Evo runs a 320 mm rotor behind 17-inch wheels. Single retailer source with customer reviews; have brake work checked.

Added 2026-10-26 · Updated 2026-10-26

Short answer: Yes, with extra parts or work Limited

Verdict:Fits with mods Limited confidence (1 of 3) · 3 sources

Yes, with extra parts or work: Fits with an adapter, per one retailer.

Years: 1995-1998 · Applies to: SE and LE (5-lug); Base needs a 5-lug conversion first · 3 sources · Last verified 2026-10-26

Safety-critical part. Manufacturer sources are cited, but they disagree or are incomplete for this fitment, so this entry is held below "Confirmed". Have the work done or checked by a qualified professional and confirm figures and part numbers against the service manual or the manufacturer.

Part	OEM Evo VIII (2003-05, all US trims) Brembo 4-piston front calipers with 320 mm rotors
Part comes from	Mitsubishi Lancer Evolution VIII (2003-2005)
Vehicle	Nissan 240SX (S14, 1995-1998)
Years	1995-1998
Trim / condition	SE and LE (5-lug); Base needs a 5-lug conversion first
Verdict	Fits with mods Fits with extra parts or work
Confidence	Limited 1 of 3 — Forum, Reddit or anecdotal report, or ambiguous/partial detail. Treat as a lead to research.
Last verified	2026-10-26 (date the cited sources were last read)

Details

Fits with an adapter, per one retailer. TF-Works sells a stainless caliper bracket that mounts Evo VIII/IX Brembo front calipers on the front of an S13/S14 with Evo VIII/IX rotors, using the stock S13/S14 banjo lines or Evo VIII lines, and recommends a 1-1/16 inch Z32 master cylinder for proper pedal feel. The Evo rotor is a 5x114.3 part, so this suits the 5-lug SE/LE. Check wheel clearance: the Evo runs a 320 mm rotor behind 17-inch wheels. Single retailer source with customer reviews; have brake work checked.

Specs

rotor mm: 320 x 32 ventilated
pistons: 4

This part on other generations

Nissan 240SX (S13, 1989-1994) — Unclear — details missing Unclear
Mitsubishi Lancer Evolution VIII (2003-2005) — Specification Factory spec

More for this car

All Nissan 240SX (S14, 1995-1998) fitment answers · S14 common problems
Newsletter archive: past issues with every new and corrected entry

Sources

TF Evo 8/9 Brembo Brake Caliper Adapter for Nissan S13/S14 — TF-Works (Touge Factory) (retailer feed; read 2026-10-26; full page read)
Adapter for the front of 240SX S13/S14; uses Evo 8/9 rotors; Z32 1-1/16 master cylinder recommended.
2003 Mitsubishi Lancer Evolution Press Kit — Mitsubishi Motors North America (editorial; read 2026-10-26; full page read)
Evo front: 320 mm ventilated rotors, four-piston calipers.
2006 Mitsubishi Lancer Evolution IX specifications (MMNA spec sheet) — Mitsubishi Motors North America (hosted by The Auto Channel) (mfr spec; read 2026-10-26; full page read)
Evo IX front: 320 x 32 mm, 4-piston.

Summaries are in our own words. Fitment is not guaranteed — disclaimer.

Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.