Will Flyin' Miata Kōgeki 17x8 +45 flow formed wheel (ND) fit a Mazda Miata NA (1990-1997)?
Added · Updated
Short answer: Yes, with extra parts or work Reported
Verdict:Fits with mods Reported confidence (2 of 3) · 2 sources
Yes, with extra parts or work: The vendor says the ND Kōgeki can go on an NA or NB but will likely need a 10-20 mm spacer for the best fit; its 67.1 mm bore needs 54.1 mm rings to be hubcentric.
Safety-critical part. This claim comes from community or vendor sources, not the vehicle or part manufacturer, so its confidence is capped at "Reported". Have the work done or checked by a qualified professional and confirm part numbers with the manufacturer.
| Part | Flyin' Miata Kōgeki 17x8 +45 flow formed wheel (ND) |
|---|---|
| Vehicle | Mazda Miata NA (1990-1997) |
| Years | 1990-1997 |
| Trim / condition | 10-20 mm spacer, depending on tire |
| Verdict | Fits with mods Fits with extra parts or work |
| Confidence | Reported 2 of 3 — Stated by one reasonably reputable source (retailer, shop, magazine). Not independently confirmed. |
| Last verified | 2026-10-26 (date the cited sources were last read) |
Details
The vendor says the ND Kōgeki can go on an NA or NB but will likely need a 10-20 mm spacer for the best fit; its 67.1 mm bore needs 54.1 mm rings to be hubcentric.
Specs
- bolt pattern: 4x100
- size: 17x8
- offset mm: 45
- center bore mm: 67.1
- weight lb: 15.95
Other wheels fitment for the NA
- NB factory wheels (4x100) — Reported to fit Fits
- 15x7 +38 wheel with 205/50R15 tire — Reported to fit Fits
- 15x9 +36 wheel with 225/45R15 tire — Fits with extra parts or work Fits with mods
- OEM NA wheel (14x5.5 or 15x6, +45) — Specification Factory spec
- 15x8 +25 wheel (4x100) with 205/50R15 tire — Fits with extra parts or work Fits with mods
- NC Miata (2006-2015) factory or NC-fitment wheels — Does not fit Doesn't fit
This part on other generations
- Mazda Miata ND (2016-present US model years) — Reported to fit Fits
- Mazda Miata NB (1999-2005 US model years) — Fits with extra parts or work Fits with mods
More for this car
- All Mazda Miata NA (1990-1997) fitment answers · NA common problems
- Guide: Miata NA/NB wheel fitment guide: bolt pattern, offsets, 15x8 sizes and brake clearance
- Guide: Miata NA/NB hardtop fitment guide: NA vs NB, OEM vs aftermarket, latches and seals
- Guide: Miata NA vs NB: differences, known problems and which parts swap
- Newsletter archive: past issues with every new and corrected entry
Sources
- Kōgeki 17x8 flow formed wheel for ND Miata — Flyin' Miata (parts vendor) (vendor article; read 2026-10-26; full page read)
- 54.1 mm wheel centering rings (set of 4) for NA, NB and ND — Flyin' Miata (parts vendor) (vendor article; read 2026-10-26; full page read)
Summaries are in our own words. Fitment is not guaranteed — disclaimer.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.