Recall: Mazda accessory hardtop hoist buckles can break (1990-93)
Added · Updated
What causes "Recall: Mazda accessory hardtop hoist buckles can break (1990-93)" on the Mazda Miata NA (1990-1997), and how is it fixed?
The buckles on a Mazda accessory hoist sold for storing the hardtop can break. Fix: If you have the original Mazda hoist, check its buckles; Mazda replaced the hoists under the recall.
Symptoms
A stored hardtop can drop from its ceiling hoist.
Cause
The buckles on a Mazda accessory hoist sold for storing the hardtop can break. This concerns the hoist, not the car itself.
Fix (summary)
If you have the original Mazda hoist, check its buckles; Mazda replaced the hoists under the recall.
Related build entries
Other NA problems
- Short-nose crankshaft (1990 and early 1991)
- Rocker and floor rust from clogged drains
- 1990-93 1.6 uses a smaller 6-inch rear differential
- Cooling parts crack with age and heat
- Verify timing belt and plug service history
- Oil leaks from the CAS O-ring and valve cover gasket
More for this car
- All Mazda Miata NA (1990-1997) fitment answers · NA common problems
- Guide: Miata NA/NB wheel fitment guide: bolt pattern, offsets, 15x8 sizes and brake clearance
- Guide: Miata NA/NB hardtop fitment guide: NA vs NB, OEM vs aftermarket, latches and seals
- Guide: Miata NA vs NB: differences, known problems and which parts swap
- Newsletter archive: past issues with every new and corrected entry
Sources
- NHTSA recall record 92V-159 (1990-93 Miata: accessory hardtop hoist buckles) — NHTSA recalls API (regulatory; read 2026-10-26; full page read)
Summaries are in our own words. Not repair instructions; consult the factory service manual.
Report a correction — spotted an error or have a better source? Email hello@chassisdex.com.